150mm To 125mm Ducting Reducer Collar

This reducer collar is used to reduce the ducting size from 6" to 5" ( 150mm to 125mm) it is normally used as a connector from the top of the motor housing spigot to round 125mm ducting, you can also use this reducer collar to connect round to flat ducting pipes using part number 9 from the chart below.

 Ducting Quick Link Chart, Simply Click The Part Number

Quick Links Part N° 1 Part N° 2 Part N° 3 Part N° 4 Part N° 5 Part N° 6 Part N° 7 Part N° 8 Part N° 9 Part N° 10 Part N° 11 Part N° 12 Part N° 1 A Part N° 2A Part N° 3A Part N° 4A Aluminium Ducting Tape